Vintage Inspired Convertible Capelet from a Sweater

Give an old sweater a new life!  

I got the sweater as present but never wore it because unless I wore a long sleeve shirt  underneath it was itchy, so I decided to turn it into something more useful with versatility.  

It is convertible in that it can be worn three different ways depending on your mood, but my favorite is the Vintage Inspired Capelet that has sort of a 1930's vibe to it.   Also, the "flower" is put on a pin back and can be used on its own.

Items used:

-  Sweater

-  Sewing machine and thread

-  Scissors

-  Straight Pins

-  Pin back

-  Velcro

-  Cylindrical object (I used a margarine tub lid)

- Seam gauge or ruler

- Paper

- Pen or Pencil

- Hot glue gun or needle and thread.

First flip the sweater upside down and cut straight across off underneath the arms from side to side.

The bottom part is what you will use to make the shrug.

Save the top part can be used to make the band and the flower and the sleeves can be saved for another future project (leg or armwarmers).

For the cut edge, use a zigzag or serger stitch to prevent unraveling all the way around and stitch 5/8 inch away from the edge as another preventative measure.

Turn under on the wrong side and stitch down all the way around and stitch 1/2 inch from the turned under edge

You now have the basic capelet completed (the first smaller picture above).




Now for the flower.  Place the cylindrical object on the paper, draw around it and cut out on  paper cut it out.

Next fold the paper into a quarter then measure in 1/2 inch or so in and cut away.  Repeat.

Pin the outside and middle layers along with the center onto the top portion of the sweater.and cut out each.  You will have 3 descending sizes of circles when you are done.

The large ring is for the bottom of the flower, the medium in the middle and the smallest center is for the top of the flower.

Zigzag or serge around the raw edges on all three circles.

Next, on the top side, using a basting stitch on the machine (or you could also do this by hand) sew a small quarter or other large coin size circle in the middle of each circle and leave  the tails on each end long as you will be gathering them up.

On the bottom side of each circle, gather up the threads and tie in a a knot on each and it will create at "bump" for the center of the flower.   Stack them on top of each other starting with the largest at the bottom, the medium one in the center and the small on on the top and push the "bump" in the center up into the next one.   Stitch around the center "bump" to secure all layers together.

Clip any lose threads and either use a hot glue gun or stitch the flower the pin back.  The pin can be used on this project or to pretty up anything else you would like.


To make the band cut a strip from the top of the sweater that is 8 inches long and 4-5 inches wide.   Zigzag or serger around the edges to keep it from unraveling.

Fold in half, right sides together and stitch one end and the long side together.  Turn inside out and zigzag the open end together (it doesn't look pretty but it isn't going to show as it will be on the inside of the shrug when it is used.    Stitch one side of the velcro to one side, flip over and flip another piece of velcro to the other side.

To use with the shrug, gather up the fabric on the shrug and wrap so the center of the band is on the outside and the two pieces of velcro hook together on the inside (third small picture above).  You can also move the band around to create a different look

For the look in the large picture above, the band was moved off center and the flower pinned to the band through the band the the shrug to secure it in place.)

Although I didn't take a picture of it, you could also use the shrug loose and pin the flower on it somewhere.  It could also be pulled up over the back of the head to create a mobius or scrunched and twisted for a cowl/infinity scarf look.

Thanks for stopping by and have a great day:)

Linking up go:

Dragon Pin

This dragon pin was made from a "gumball" toy machine at the movies where you put in a quarter or fifty cents and get toy or, in this case, a necklace and it only took about five minutes to make.


Items used:

• Plastic dragon off of the necklace
• Hot knife
• Silver paint (or silver paint pen)
• Pin back
• Hot glue gun and glue stick

I used the hot knife to cut the circular plastic piece off of the top then used a silver paint pen to touch up the white plastic the was underneath where the circular piece had been.











I then applied hot glue to the center or the back horizontally and pushed the pin back down and allowed to drive.

TODAY ONLY - Free with free shipping Limited Edition Silver Plated Breast Cancer Awareness Pin

For today only and while supplies last, you can receive the above pin to support breast cancer awareness and survivors for free.

1Saleaday.com is a site that offers daily deals at a deep discount on a different item each day (while supplies last) in four categories:   Wireless, Watch, Family and Jewelry. 

Occasionally, they will offer an item for free and free shipping - in the past I have received a business card case and a multi-purpose pocket survival tool.

Christmas ornament to ornamental pin

This is a just a Christmas ornament in the shape of a musical note that I found for fifty cents at a thrift store that I made into an ornamental pin to wear. Gather the items you are going to use for your project. I used:

• Christmas ornament
• Strip of sequins by the yard from my stash
• Split jump ring
• Pin Back
• Scissors
• 9001 Clear Glue
• Fabric paint (optional - I used two dabs of glow in the dark paint on two of the stones for added interest)

Attach the split ring to the top of the ornament, then to the center of the pin. Put the glue on top of the pin the put a strip of sequins on the top and press down firmly, then let dry.

SCOTTIE DOG PIN

COST: Under 50 cents (all are scraps from my stash, the seed beeds were less than a penny each, I previously purchased a bag of 100 googly eyes for $1, the peach nose is from fabric paint that I have had for a few years and the pin back came in a bag of 50 that I got on clearance at for $2).

TIME: 25 mins (mostly due to hand stitching)

I love this Scotty Dog project! We used to have Scotty Dog and wearing this honor's Dutchess's memory.

I previously made a scarf using this pattern: http://www.cutoutandkeep.net/projects/mister_scotty_the_scotty_dog/versions/1

This is a Scotty Dog pin that I made to pin on my jacket when I wear the scarf.

I stuffed this one with fabric scraps and used white seed beads and sewed my initial to his coat.