Hydrangeas Hair Clip

Make a pretty flower hair clip from scraps!

This is based on a tutorial at http://sewingforscarlett.blogspot.com/2010/07/felt-hydrangeas.html where she made Hydrangeas out of felt.  Instead of felt I used scraps of blue cotton and more "petals" on mine.   I used an old hair clip so and a scrap of felt, so the only "new" for this project was the hot glue for the glue gun - other than that, it is an upcycle.

Items used:

• Fabric Scraps
• Scrap of felt
• Scrap of paper
• Scissors
• Pen
• Soda Can
• Hair clip (or a barrette)
• Hot glue gun and glue sticks

Place the soda can on a scrap of paper and draw a circle for a template and cut out.  Place the circle on a scrap of felt, draw around it and cut it out.

Cut out little X/petal shapes (like asideways "X") out of the cotton fabric.  I used about 35 little "X"s for this project and found it easier to fold the fabric over several times and cut out the "X"s freehand as opposed to drawing on the fabric and cutting out individually.

Start around the edges and work inward.  I found it easiest to fold up the X so there is a point at the bottom and dab a bit of the hot glue on the point and place it on the felt so you don't burn your fingers with the hot glue - is you want to push it down to secure it, use a pen or pencil.

Once you have glued down all of the pieces and it is fully covered, apply hot glue to the clip then press the flower on top of the clip.

From the  underside, trim around the edges so none of the felt piece is sticking out but without cutting any of the flower pieces off and it is ready to go!

MELDED T-SHIRTS

Meld a too small t-shirt front to a t that fits in 20 minutes!

My son is in to car themed t-shirts and when I found one at the thrift store that was too small I decided to meld it to one that fits.  (It looks a little crooked in the picture, but it is how it is hanging on the hangar).

Items used:

• T-Shirt front that you want to use
• T-Shirt that fits
• Heat N Bond
• Iron
• Scissors
• Pen or Tailor's Chalk
• Sewing Machine and Thread

To get an even rectangle shape, I used a piece of scrapbook paper and drew with a pen around the edges, then moved the square to the left and did drew around the edged on that side to make a rectangle.  You could use a circle a square or freehand it, depending on the design you want to meld onto the other t-shirt.

Cut out where the lines on the t-shirt have been drawn with a pen or Tailor's Chalk.

This step is the biggest time saver - instead of pinning and re-pinning to get the piece straight on the t-shirt you are melding the piece to, use HeatNBond on the edges.  I cut approximately 1 inch strips of the HeatNBond and then on the wrong side of the t-shirt piece approximately 1/4 inch away for them edges.   I placed it 1/4 inch away from the edges at it will curl up a bit on the edges and look more natural, more like a meld than an applique where you would just stitch or zigzag around the edges.  I do not recommend using HeatNBond on the entire piece as it will make the finished product too stiff, unnatural looking and may even be uncomfortable.  The HeatNBond it more to tack it down in place to it can be sewn without having to use any pins.

Using an iron set on medium to high heat (depending on the fiber content in the t-shirts - if polyester blend, go with medium heat, if both are cotton you could use high heat) and set on the strips for 30 seconds pull up, repeat until all strips have been irorned.  Allow to sit until cool to touch (1-2 minutes) then pull off the paperbacking off of each strip.

Flip the t-shirt piece over to the right side and position it on the t-shirt you are melding it to.  Repeat going around the edges and holding the iron in place for 30 seconds, then lifting and going on to the next edge until you have gone all the way around the t-shirt.

Using a sewing machine, stitch around the edges 1/4 inch from the edge all the way around and then you are ready to wear your creations!

2 MINUTE UPDO

Quick and easy updo for medium to long hair.

This is based on the video tutorial over at Ebeautyblog.com http://www.ebeautyblog.com/2010/07/2-minute-updo-for-work.html.
It may be easier just to watch her video, but I did a step-by-step just in case someone is using a dial up connection as it takes forever for videos to load.

Items used:

• Comb
• Anti-Frizz product or styling gel
• 2 Ponytail Holders
• Bobby Pins
• Hairspray (optional)

Use an anti-frizz product or styling gel to smooth out hair and control flyaways.  I use got2b Smooth Miracle Repair Treatment as my hair is color treated, but use whatever product works best to control your hair.

Brush into a pony tail high on the back of the head and secure with ponytail holder.   I folded my hair up and then secured again with another ponytail holder.

As I couldn't get a decent pic, below is to represent the back the head with the folded pony tail.  Use your fingers where the lines are drawn to create and opening in the hair then tuck the hair inside the opening.

Using the comb smooth over the opening and secure the hair with bobbypins as needed.

Shorts for Boy Rag Doll

See Shorts For Rag Doll and 1000's of others - or share your own on Cut Out + Keep

I made up a pattern for shorts for the boy rag doll as I didn't want him going au natural to his new home. 
I accidentally deleted the step by step photos before going on vacation, but I have created and posted a  "how-to" over at Cut Out and Keep.  The pattern is based on the original pattern for the doll over at Dolly Donations.